SPECIFICATIONS

Power Train

• EngineCaterpillar© C-18 Tier III Diesel | MTU 6R1500 Tier 4F
• Rating600 HP (447 kW) | 617 HP (460 kW)
• Maximum Speed1800 RPM
• Fuel Capacity300 Gallon (1,136 L)
• TransmissionEaton-RTLO-22918B, 10 Speed
• Clutch15 1/2 in. (394 mm) Twin Disk
• Battery(2) Deka 908DMF,12V,1450 CCA

Controls

• Remote ControlsMud Pump Throttle, Mud Pump Start/Stop, Clutch Actuator, Horn remote
• Remote InstrumentsDigital Mud Flow Meter (gallons/liters per minute) | Murphy PV380 Multi-function Display

Pump

• Pump DesignQuintiplex, piston and liner
• Rated Capacity750 U.S.Gallons (2,839 L)/min.
• Bore x Stroke5.5 x 7.87 in (139.7 x 200 mm)
• Maximum Pressure1,500 psi (103 bar)
• *Note: Pump Capacity will Vary Depending on the Overall Mud Weight, Drilling Fluid Mixture/Content, and the Working Elevation

Accessories

• • Pulsation Dampener on inlet and discharge
  • (2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm) Kamlok Fittings
  • Liner Wash System w/Supply Tank
  • 24 V Work Lights

Dimensions

• Length25 ft. 6 in. (7.8 m)
• Height10 ft. (3.12 m)
• Width8 ft. (2.49 m)

Weights

• Total WeightTier 4 Final - 48,500 lbs. (22,000 kg)

Mud Motor Specifications

• Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Auger’s mud pumps can be used with any brand or size of a directional drill.

Mud Motor Information