SPECIFICATIONS

Power Train - One Power Pack

• EngineCaterpillar C-18 Tier 4 Final or Tier 3 Diesel (depending on country of purchase)
• Rating755 HP (570 kW)
• Fuel Capacity650 U.S. Gallons (2,460 L)
• Hydraulic Capacity220 U.S. Gallons (833 L)
• Hydraulic FilterHigh Pressure Filtration to 6 Micron ABS

Carriage System

• Maximum Thrust/Pullback1,100,000 lbs. (500 Tonnes)
• Carriage SystemRack & Pinion, (6) Pinion and Gear with Adjustable Force Limiter
• Maximum Carriage Speed105 ft. (32 m)/minute
• Carriage Motors(6) 1017 cc Variable Displacement
• Carriage Gearbox(6) Planetary Drives
• Hydraulic Pump(2) Closed Loop-Piston

Rotary Drive

• Rotary System(4) Pinion and Gear Drive with Infinitely Variable Torque
• Maximum Rotary Torque100,000 ft-lbs. (135,600 Nm) @ 0 – 31 RPM
• Minimum Rotary Torque40,000 ft-lbs. (54,000 Nm) @ 0 – 75 RPM
• Maximum Rotary Speed75 RPM
• Rotary Motors(4) 160cc, Axial Piston, Variable Displacement
• Rotary Brakes(4) Spring Applied, Hydraulic Release
• Fluid Course4 in. (102 mm)
• Mud Flow RatePermits up to 1,000 U.S. Gallons (3,785 L)/per minute
• Maximum Mud Pressure1,500 psi (103 bar)
• Mud Shutoff Cylinder2 in. Bore x 12 in. Stroke (51 - 305 mm)
• Mud Blow Down Cylinder1 1/16 in. Bore x 4 in. Stroke (27 - 102 mm)
• Hydraulic Pump(2) Closed Loop-Piston
• Auxiliary Pump(1) Pressure Compensated-Piston
• Slip Spindle8 5/8 in. (219 mm)

Wrench

• Wrench TravelWrench can Travel the Full Length of the Thrust Frame
• Maximum Breakout Torque220,000 ft-lbs. (298,000 Nm)
• Maximum Makeup Torque150,000 ft-lbs. (203,000 Nm)
• Clamp/Grip Range3.5 in.– 10.5 in. (89 – 267 mm) OD
• Wrench Motor(2) Hydraulic, LSHT, 12.5 CIR
• Wrench Brake(1) Spring Applied, Hydraulic Release

Drill Rig

• Drill Angle10° - 18°
• Drill PipeRange II – 34 ft. (10.4 m)

Safety

• • Es!Lok – Exit Side Lockout System with 1 mile (1.6 m) Range
  • ZAPALERT – Electrical Detection Device
  • Run on One Technology system (ROOTS)
  • Freestanding operator’s console with pressure gauges
  • Operator’s manual and other unit support materials

Drill Rig Dimensions

• Length64 ft. 10 in. (19.5 m)
• Width8 ft. 2 in. (2.5 m)
• Height11 ft. 10.25 in. (3.6 m)

Single Power Pack

• Length19 ft. 8 in. (5.99 m)
• Width8 ft. (2.43 m)
• Height9 ft. 5 in. (2.88 m)

Single Power Pack Weight

• Total Weight35,500 lbs. (16,103 kg)

Drill Rig Weight

• Total WeightWith Wrenches: 112,580 lbs. (51,065 kg)

Dual Power Pack (ROOTS)

• • Simultaneously run both power units
  • Permits one power unit to run while powering through the unused power unit
  • Allows one power unit to run, but keeps the unused power unit isolated
  • Excercise the ability to have one power unit running, but have the unused power unit removed
  • Unit maintains full power with single engine, but system runs with half rotational RPM and half carriage drive speed