36/42-440 NG Performance Specifications

Power Train
Engine	Deutz BF3L2011 Turbo Diesel
Rating	60 HP (45 kW)
Maximum Engine Speed	2800 RPM
Engine Torque	107 ft-lbs. (145.1 Nm)  2800 RPM 129 ft-lbs. (174.9 Nm) 1600 RPM
Maximum Noise Rating	97 dB(A)
Fuel Capacity	20 U.S. Gallons (76 L)
Hydraulic Capacity	25 U.S. Gallons (95 L)
Battery	(1) Deka 634MF 12 V,  690 CCA
Transmission
Type	T-18 4 Speed
Transmission Ratios	Gear Ratio 1St Gear 6.32:1 2ND Gear 3.09:1 3RD Gear 1.69:1 4th Gear 1.00:1 Reverse 7.44:1
Clutch	Spring Applied with 10 in. (254 mm) Diameter Single Disk/Hydraulically Assisted Clutch Actuator
Gearbox
Ratio	60.2:1
Torque & Speed
Torque Requirements (1600 RPM)	Gear Output Max. Speed 1st 49,080 ft-lbs. (66,540 Nm) 4 RPM 2nd 23,996 ft-lbs. (32,524 Nm) 9 RPM 3rd 13,124 ft-lbs. (17,790 Nm) 16 RPM 4th 7,766 ft-lbs. (10,530 Nm) 27 RPM Reverse 57,778 ft-lbs. (78,348 Nm) 4 RPM *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss
Torque Requirements (2800 RPM)	Gear Output Max. Speed 1st 40,710 ft-lbs. (55,200 Nm) 8 RPM 2nd 19,904 ft-lbs. (26,994 Nm) 15 RPM 3rd 10,886 ft-lbs. (14,754 Nm) 28 RPM 4th 6,441 ft-lbs. (8,733 Nm) 47 RPM Reverse 47,924 ft-lbs. (64,974 Nm) 5 RPM *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss
Hydraulic System
Maximum Thrust	440,000 lbs (200 Tonnes)
Hydraulic Pump	Axial Piston Pump with Load Sensor
Gear Pump	57cc Piston
Maximum Pump Pressure	3,500 psi (241 bar)
Maximum Pump Output	35 U.S. Gallons (132 L)/minute
Hydraulic Motors	(2) 60 CIR, LSHT, TPR
Hydraulic Push Bar Cylinder	(1) 2 in. Bore x 4 in. Stroke  (51 mm x 102 mm)
Hydraulic Clutch Cylinder	(1) 1 ½ in. Bore x 4 in. Stroke (38 mm x 102 mm)
Hydraulic Thrust Cylinder	(2) 9 in. Bore x 35 in. Stroke (229 mm x 889 mm)
Hydraulic Suction Strainer Filter	Suction Strainer with 100 Mesh Screen
Hydraulic Return Filter	High Pressure Return Filter to 6 Micron ABS with Replaceable Element
Master Pusher
Diameter	36 in. (914 mm)
Working  Range	12 in.– 42 in. (305 – 1,067 mm) Casing Diameter
Hex Drive	4 in. (102 mm)
Quik Split™	Quik Tran™
The Quik Split™ frame design allows the machine to be separated into sections to accommodate lighter and fasters lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning	Quik Tran™ is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Trans benefit will be easier machine operation in challenging work climates or conditions.
Spoil Door
With a Safety-First commitment all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber.
Dimensions
Length	12 ft. 4 in. (3.76 m)
Width	5 ft. 4 in. (1.62 m)
Height	5 ft. 6 in. (1.68 m)
Master Track Length	13 ft. (3.96 m) w/1 in. (25 mm) back plate
Master Track Width	5 ft. (1.52 m)
Centerline	26.93 in. (684 mm)
Extension Track Length	10 ft. (3 m)
Extension Track Width	5 ft. (1.52 m)
Weights
Base Unit (Split Weight)	4,100 lbs. (1,860 kg)
Power Pack (Split Weight)	4,300 lbs. (1,950 kg)
Master Pusher	1,200 lbs. (544 kg)
Master Track	3,500 lbs. (1,588 kg)
Lifting Sling	200 lbs. (91 kg)
Total Weight	13,300 lbs. (6,033 kg)
Extension Track	2,800 lbs. (1,270 kg) each
Master Saddle	265 lbs. (120 kg)
Misc.
Work Lights	(3) 12 Volt
Extension Track	(2)
Master Saddle	(1) 36 in. (914 mm) compatible