Print

60-1200 Auger Boring Machines

. Posted in Auger Boring Machines

Next Generation

Highly Productive Rack & Pinion pulls the machine back to its starting point on the track quickly - no dogging or winching.

Design Benefits

  • Increased ability to pull auger, steering rods, and push product
  • Increased visibility to the master pusher
  • Low Centerline and Wide Stance provide increased stability
  • Hydraulically assisted clutch is easier and more comfortable to operate
  • No Hook Rollers, machine locks safely to the track
  • Ergonomic operating button allows for feathering the rotation and slow turn of the shaft for easy auger installation
  • Emergency shutdown switch at the operator's station as well as an operator presence tethered switch
  • Vivid graphics guide safe and proper machine operation
  • Updated gauge system includes the improved engine tachometer, engine warning light, & hydraulic thrust pressure reading
The Quik Split frame design allows the machine to be separated into sections to accommodate lighter and faster lifts into and out of the bore pit and aids the operator in being able to facilitate better and safer machine positioning.

60-1200 Performance Specifications

Power Train
  Tier 3 Tier 4 final
Engine Deutz TCD914O6 Tier 3 Diesel Volvo TAD571VE Tier 4f Diesel
Rating 174 HP (130 kW) 173 HP (129 kW)
Maximum Engine Speed 2300 RPM 2200 RPM
Engine Torque 373 ft-lbs. (505.7 Nm) @ 2300 RPM 395 ft-lbs. (536 Nm) @ 2200 RPM
468 ft-lbs. (634.5 Nm) @ 1600 RPM 597 ft-lbs. (809 Nm) @ 1200 RPM
Fuel Capacity 39 U.S. Gallons (148 L) 48 U.S. Gallons (182 L)
Hydraulic Capacity 22 U.S. Gallons (83 L) 22 U.S. Gallons (83 L)

 

Transmission
  Tier 3 Tier 4 final
Type Eaton FS-5205A, 5-speed Eaton FS-5205A, 5-speed
Clutch Spring applied with 14 in. (356 mm) diameter single disk pneumatically-assisted clutch actuator Spring applied with 14 in. (356 mm) diameter single disk pneumatically-assisted clutch actuator

 

Gearbox
Ratio 38.8:1

 

Hydraulic System
Maximum Thrust 1,200,000 lbs. (544 Tonnes)
Hydraulic Thrust Cylinder (4) 9 in. Bore x 35 in. Stroke (229 mm x 889 mm)

 

Master Pusher
Diameter 60 in. (1,524 mm)
Working Range 24 in. – 60 in. (610 – 1,524 mm) Casing Diameter
Hex Drive 5 in. (127 mm)

 

Quik Split Quik Tran
The Quik Split frame design allows the machine to be separated into sections to accommodate lighter and fasters lifts into and out of the bore pit and aids the operator in being able to facilitate better and safer machine positioning. Quik Tran is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Trans benefit will be easier machine operation in challenging work climates or conditions.

 

Spoil Door
With a Safety-First commitment all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber.

 

Dimensions
  Tier 3 Tier 4 final
Length 14 ft. 7 in. (4.43 m) 14 ft. 10 in. (4.52 m)
Width 7 ft. 1 in. (2.16 m) 7 ft. 3 in. (2.21 m)
Height 7 ft. 5 in. (2.27 m) 7 ft. 6 in. (2.29 m)
Master Track Length 15 ft. (4.57 m) w/1 in. (38 mm) back plate
Master Track Width 7 ft. 4 in. (2.23 m)
Centerline 36.02 in. (915 mm)
Extension Track Length 10 ft. (3 m)
Extension Track Width 7 ft. 4 in. (2.23 m)

 

Weights
Base Unit (Split Weight) 8,900 lbs. (4,037 kg)
Power Pack (Split Weight) Tier 3:  8,600 lbs. (3,901 kg)          Tier 4f:  11,500 lbs. (5,216 kg)
Master Pusher 2,390 lbs. (1,084 kg)
Master Track 7,100 lbs. (3,221 kg)
Lifting Sling 550 lbs. (249 kg)
Total Weight TIER 3:  27,540 lbs. (12,492 kg)          TIER 4f:  30,440 lbs. (13,807 kg)
Extension Track 5,600 lbs. (2,540 kg) each
Master Saddle 135 lbs. (61 kg)

 

Miscellaneous
Work Lights (3) 12 Volt
Extension Track (2)
Master Saddle (1) 60 in. (1,524 mm) compatible