Print

P-750 Mud Pumps

. Posted in Mud Pumps & Cleaning Systems


Features And Benefits

  • Allows the operator to get enough flow to keep the bore flushed clean of cuttings
  • Designed with a compact skid mounting and provides a small footprint that is ideal form most drilling conditions
  • Compatible with any drill brand making it suitable for contractors operating a variety of sizes, makes and models of drilling equipment

P-750/G2 Performance Specifications

Power Train
Engine Caterpillar© C-18 Tier III Diesel MTU 6R1300 Tier 4F                                                        
Rating 600 HP  (447 kW) 482 HP (360 kW)
Maximum Speed 1800 RPM
Fuel Capacity 300 Gallon (1,136 L)
Transmission Eaton-RTLO-22918B, 10 Speed
Clutch 15 1/2 in. (394 mm) Twin Disk
Battery (2) Deka 908DMF,12V,1450 CCA

 

Controls
Remote Controls Mud Pump Throttle, Mud Pump Start/Stop, Clutch Actuator, Horn remote
Remote Instruments Digital Mud Flow Meter (gallons/liters per minute) Murphy PV380 Multi-function Display

 

Pump
Pump Design Quintiplex, piston and liner
Rated Capacity 750 U.S.Gallons (2,839 L)/min.
Bore x Stroke 5.5 x 7.87 in (139.7 x 200 mm)
Maximum Pressure 1,500 psi (103 bar)
*Note: Pump Capacity will Vary Depending on the Overall Mud Weight, Drilling Fluid Mixture/Content, and the Working Elevation

 

Accessories
  • Pulsation Dampener on inlet and discharge
  • (2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm) Kamlok Fittings
  • (2) 25 ft. (7.6 m) Discharge Hoses with 3 in. (76.2 mm) NPT Hammer Unions
  • Liner Wash System w/Supply Tank
  • 24 V Work Lights

 

Dimensions
Length 25 ft.  6 in. (7.8 m)
Height 10 ft. (3.12 m)
Width 8 ft. (2.49 m)

 

Weights
Total Weight Tier 4 Final - 48,500 lbs. (22,000 kg)

 

Mud Motor Specifications
Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Augers mud pumps can be used with any brand or size of directional drill.
Mud Motor Size (Inch) 3-3/8 3-1/2 4-3/4 6-3/4 8
Mud Motor Size (Millimeter) 85.72 88.9 120.6 171.4 203.2
Flow Rate (GPM) 30-120 75-160 100-250 300-600 400 - 900
Flow Rate (LPM) 113.6 - 454.2 283.9 - 605.7 378.5 - 946.4 1,136 - 2,271 1,514 - 3,407