P-600 Mud Pumps

. Posted in Mud Pumps & Cleaning Systems

  • New! Tri-plex 600GPM Pump with Rated Capacity of 600 US gallons (2,067 L) / minute
  • Caterpillar C-15 Tier III diesel engine
    *Tier III or Tier 4i determined by country of purchase
  • Stand-alone, self-powered and compatible with any drill brand
  • Optional Quiet Pak

Features And Benefits

  • Allows the operator to get enough flow to keep the bore flushed clean of cuttings
  • Designed with a compact skid mounting and provides a small footprint that is ideal form most drilling conditions
  • Compatible with any drill brand making it suitable for contractors operating a variety of sizes, makes and models of drilling equipment

Product Options

Any drilling fluid cleaning system should have 1.5 - 2 times the capacity of the mud pump on the job. The MCM-4000 is suitable for drillers whose mud pump output is 200 - 600 U.S. Gallons (757 - 984 L)/minute.

P-600 Performance Specifications

Power Train
Engine Caterpillar© C-15 Tier III Diesel
*Tier III or Tier 4i determined by country of purchase
Rating 475 HP  (354 kW)
Maximum Speed 2100 RPM
Noise Rating 1 Meter Distance 104 dB(A)
3 Meter Distance 95 dB(A)
Fuel Capacity 300 U.S. Gallons (1,136 L)
Transmission Eaton-FRO-16210B, 10 Speed
Clutch 15.5 in. (394 mm) Twin Disk
Battery (2) Deka 908DMF 12V,1450 CCA


Remote Controls Mud Pump Throttle, Mud Pump Start/Stop, Clutch Actuator, Horn remote
Remote Instruments Digital Mud Flow Meter (gallons/liters per minute)


Pump Design Tri-plex 600GPM
Rated Capacity 600 U.S.Gallons (2,067 L)/min.
Bore x Stroke 6 x 6 in. (152.4 x 152.4 mm)
Maximum Pressure 1,505psi (1043 bar)
*Note: Pump Capacity will Vary Depending on the Overall Mud Weight, Drilling Fluid Mixture/Content, and the Working Elevation


  • Pulsation Dampener on inlet and discharge
  • (2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm) Kamlok Fittings
  • (2) 25 ft. (7.6 m) Discharge Hoses with 3 in. (76.2 mm) NPT Hammer Unions
  • Liner Wash System w/Supply Tank
  • 24 V Work Lights


Length 20 ft. (6.096 m)
Height 9 ft. (2.7 m)
Width 8 ft. (2.49 m)


Total Weight 29,800 lbs. (13,520 kg) estimated


Mud Motor Specifications
Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Augers mud pumps can be used with any brand or size of directional drill.
Mud Motor Size (Inch) 3-3/8 3-1/2 4-3/4 6-3/4
Mud Motor Size (Millimeter) 85.72 88.9 120.6 171.4
Flow Rate (GPM) 30-120 75-200 100-250 300-600
Flow Rate (LPM) 113.6 - 454.2 283.9 - 605.7 378.5 - 946.4 1,136 - 2,271