Print

P-350 Mud Pumps

. Posted in Mud Pumps & Cleaning Systems

Made for Your Mid-size Projects!

Features And Benefits

  • Ten-speed transmission for variable flow requirements
  • Direct drive increases efficiency and reduces fuel consumption
  • Excellent serviceability even in the Quiet Pak sound enclosure

MUD MOTOR SIZE
(IN. / MM)

3 3/8 / 85.72 3 1/2 / 88.9 4 3/4 / 120.6 6 3/4 / 171.4

FLOW RATE
(GPM / LPM)

30-120 / 113.6-454.2 75-160 / 283.9-605.7 100-250 / 378.5-946.4 300-600 / 1136-2271

P-350 Performance Specifications

Power Train
Engine Caterpillar© C-7 Tier 4i Diesel, Caterpillar© C-6.6 Tier 3, 275 HP available for some regions
Rating 275 HP  (205 kW)
Fuel Capacity 180 U.S. Gallons (681 L)
Transmission Eaton-FRO-11210B, 10 Speed
Battery (2) Deka 908DMF 12V,1450 CCA

 

Controls
Remote Controls Mud Pump Throttle, Mud Pump Start/Stop, Clutch Actuator, Horn
Remote Instruments Digital Mud Flow Meter (gallons/liters per minute)

 

Pump
Pump Design Tri-plex piston and liner pressure lube system
Rated Capacity 350 U.S.Gallons (1,325 L)/min.
Bore x Stroke 4.5 x 5 in. (114.3 x 127 mm)
Maximum Pressure 1,300psi (90 bar)
*Note: Pump Capacity will Vary Depending on the Overall Mud Weight, Drilling Fluid Mixture/Content, and the Working Elevation

 

Accessories
  • Pulsation Dampener on inlet and discharge
  • (2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm) Kamlok Fittings
  • (2) 25 ft. (7.6 m) Discharge Hoses with 3 in. (76.2 mm) NPT Hammer Unions
  • 33 US gallonss (125 L) / minute liner wash system with supply tank
  • (2) 24 V LED Work Lights

 

Dimensions
Length 17 ft. (5.18 m)
Height 8 ft. 6.5 in. (2.6 m)
Width 8 ft. (2.49 m)

 

Weights
Total Weight 28,000 lbs. (12,700 kg) estimated

 

Mud Motor Specifications
Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Augers mud pumps can be used with any brand or size of directional drill.
Mud Motor Size (Inch) 3-3/8 3-1/2 4-3/4 6-3/4
Mud Motor Size (Millimeter) 85.72 88.9 120.6 171.4
Flow Rate (GPM) 30-120 75-200 100-250 300-600
Flow Rate (LPM) 113.6 - 454.2 283.9 - 605.7 378.5 - 946.4 1,136 - 2,271